Netmon TAP System

Netmon NPB2000-TAP



Netmon NPB2000 System is the Network NPB System with the NPB function for network packet monitoring and the filtering function based on the L2 ~ L4 headers of packet as well, and is the system which provides the optimal solution.

Netmon NPB2000 provides the 100% of packet monitoring with the function of split & aggregation NPB and provides the filtering on L2~L4 packets such as Src-IP, Dst-IP, MAC, TCP-port and UDP-port, etc. Netmon NPB2000 provides the 4 ports for network with SX/LX/Copper types and 6 ports for monitoring, and can be interconnected with various monitoring systems.

Netmon NPB2000 can be interconnected with the system : Packet Analyzing Equipment, Network Monitoring & Diagnostic & Monitoring Equipment, VoIP Monitoring Equipment, Monitoring Equipment in need of Filtering. It offers three product models: NPB2000-NPB for improved visibility, NPB2000-TAP for TAP functionality, and NPB2000-Bypass for Bypass functionality, as well as Copper-type TTTT and Optic-type MMMM modules.

Datasheet

NPB2000-NPB Highlights

  • Support for all the protocols
  • Support for Single Port 10/100/1000 UTP NPB
  • Support Packet Filtering : Src-IP/Dst-IP, Src-MAC/Dst-MAC, TCP/UDP Src/Dst port, User Defined Byte (UDB), IPv6
  • Support CLI and Web GUI management
  • Provide the 10 ports for Network and Monitoring per Module (Front 8 ports, Rear 2 ports)
  • Support SNMP / SNMP Trap
  • Support SNTP, SYSLOG, In/Out Traffic statistics
  • Provide Ethernet Mgmt port and Serial console
  • Support the both of copper and optics(SX/LX)
  • Power Supply Redundancy
  • 1U 19’’ Rack Mountable

NPB2000-TAP Highlights

  • Provide all functionality of NPB2000-NPB
  • Support Packet Aggregation and Split TAP, M:N Packet Mirroring
  • Support LFM(Link Fault Management)
  • Support for Network Line Bypass while Power Failure
  • Zero Packet Loss when Power Off (Battery Optional)

NPB2000-Bypass Highlights

  • Provide all functionality of NPB2000-NPB
  • Support various Heartbeat Type (ARP, ICMP, Link)
  • Support Inline, Active Bypass, Link Drop Mode
  • Support link with multiple Appliance
  • Support LFM(Link Fault Management)
  • Support Failover within 20ms when Power Off (Battery Optional)

Specification

Network Port Interface LC or RJ45 UTP
Monitor Port Interface SFP or RJ45 UTP
Power Input 2.0 A @12VDC
Operating Temperature 0 ℃ ~ 50 ℃
Storage Temperature -20 ℃ ~ 70 ℃
Relative Humidity 10 ~ 90% , No condensing
Weight [g] Main System : 1.725 kg / Module : 0.730 kg
Dimension [W x D x H] 482.6 mm x 356.0 mm x 44.5 mm
Install Type 1U Rack mount

Ordering Information